Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light and Bulbs on the Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Tail light

In this short and simple guide, learn how to remove and replace the rear light and its bulbs on the Mercedes-Benz B-Class. First, open the boot lid and start by removing the cover found on the side, accessing the screws of the rear light; unscrew these to remove the light, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, replace the bulbs attached to the light unit by pressing and twisting them; replace the entire unit if necessary, applying the reverse procedure for reassembly!

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Light Bulb of the Mercedes B-Class
Replacing the Brake Light Bulb of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. light bulb of the rear light on the Mercedes B-Class. First, open the boot lid and start removing the side cover, which gives access to the inside of.. …
Removing and Replacing the Rear Light Bulbs on the Mercedes B-Class
Removing and Replacing the Rear Light Bulbs on the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. replace the rear light bulbs on the Mercedes B-Class by following these simple steps. First, open the boot lid and start removing the plastic side cover.. …
How to replace the rear headlight bulb of a Mercedes B-Class?
How to replace the rear headlight bulb of a Mercedes B-Class?
Mercedes Classe B (2005-2011 / W245, MK 1) .. replace the rear headlight bulb on a Mercedes B-Class, start by opening the rear hatch. Then, you will need to remove the access panel by unscrewing.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos