Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to disassemble the air pump on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Pump
Operation: How to disassemble the air pump on Mercedes C-Class

Do you want to remove the air pump on your Mercedes C300 class yourself and do not know how to do it? Let's see in the following video how to disassemble the piece: lift the bonnet, unscrew the pins on the plate that holds the pump (we use a socket wrench with relative bushes), unscrew all the pins around it. Once the pump has been unscrewed, we disconnect the various connections, replace the previously disassembled piece with a new one that is the same. We tighten the pins and hoses to the pump well. Make sure that you have correctly inserted and mounted the piece in the appropriate housing with all its parts.


Posted on 18 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - How much does it cost to replace the water pump in the Mercedes C-Class? Read Answer
    • Classe C 2007-2013 - Where is the high pressure pump located on a Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos