Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the TPMS light in a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light of a Mercedes C-Class car, you will need to follow the procedure shown in the selected video tutorial. Get into the vehicle and turn on the instrument panel without starting the engine.

Use the buttons on the steering wheel to navigate through the settings menu and scroll to select the tire pressure option; then select the Reset option and confirm the operation with the "ok" button. Finally, turn off and on the instrument panel to verify that the operation was successful.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2021-2026 / W206) .. the tire pressure light on the Mercedes-Benz C-Class; before performing the reset, ensure all four tires are at the recommended pressure. Then, get.. …
Mercedes Classe C (2014-2021 / W205) .. the tire pressure warning on the Mercedes C-Class. Before resetting the TPMS sensors, ensure that all four tires are at the proper operating pressure... …
Mercedes Classe C (2007-2013 / W204) .. monitoring system (TPMS) light on the Mercedes C-Class. Before resetting the TPMS sensors, ensure that all four tires are at the proper operating pressure... …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos