Do it yourself
Frequently asked questions about cars and motorcycles

Replace the gear knob of the Mercedes Viano.

Model: Mercedes Viano MK 1, W639 - Years 2003-2013
Part: Shifter boot

Over time and frequent use, the gear knob of the Mercedes Viano can wear out and take on a bad appearance to the point of requiring replacement. To remove it, start by removing the cover where the gear shift pattern is screen printed using a flathead screwdriver, with a T20 torx key unscrew the screw at the top of the knob so we can remove the old knob, being careful of the spring underneath. Now take the new knob and insert it onto the gear lever, compressing the spring, tighten it by tightening the torx screw and put back the cover with the gear shift pattern.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Viano (2003-2013 / MK 1, W639) To gain access to the OBD2 port located inside your Mercedes Viano, carefully read all the following steps and apply them one by one. First, park you…
Mercedes Viano (2003-2013 / MK 1, W639) The fuse box of your Mercedes Viano W639 (2003-2013) is located inside the cabin. With this dedicated guide, you will finally be able to locate it wi…
Mercedes Viano (2003-2013 / MK 1, W639) In this video, see where the battery is located in the Mercedes Viano van, useful if you need to replace or simply recharge it. As shown, it is not i…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos