Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service indicator light on the Mercedes C-Class?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

By inserting the key to turn on the instrument panel, it will be possible to completely make the Service light disappear that is shown on the instrument panel of the Mercedes C-Class, by holding down the OK and call answer buttons located on the steering wheel spokes.

By holding down these buttons, a menu will open in which you can navigate using the steering wheel controls, selecting "ASSYST PLUS": then you will need to select "Full service" and "Conf. Full service". When the confirmation message is shown, you will need to select "Yes", and then turn off the instrument panel to complete the operation.


Posted on 20 June 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. light for the oil change of the Mercedes C-Class. First, get into the car and turn on the instrument panel; then press the call button and the "ok".. …
Mercedes Classe C (2007-2013 / W204) .. the "Service" light on your Mercedes-Benz C-Class. Start by turning on the vehicle and checking that the "Service" indicator is visible on the display... …
Mercedes Classe C (2014-2021 / W205) .. The service indicator for the Mercedes C-Class can be reset directly by us drivers, as an alternative to what happens in the workshop using professional.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos