Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to replace the wheel on Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Wheel
Operation: How to replace the wheel on Mercedes Sprinter

How to replace a damaged wheel with a spare on a Mercedes Sprinter? Let's see how to proceed: let's take the wheel removal kit which includes: jack, jack lever, screwdriver, bolt wrench (if present), telescopic wrench, spare wheel. We position the jack under the grip point of the machine, raise the vehicle a little and loosen the wheel pins. We lift with the jack lever, unscrew the pins and pull the wheel away from the hub. We mount the spare wheel (as in the video) on the hub with the respective pins and bring the car to the ground. Always remember to store the assembly kit with all its parts in the appropriate compartment.


Posted on 29 October 2023 by ScegliAuto



Where is the spare wheel on the Mercedes Sprinter located?
Mercedes Sprinter (2006-2018 / MK 2, W906) The spare wheel of the Mercedes Sprinter is positioned under the floor of the vehicle, at its rear. To be able to reach it, you have to go and open t
How to release the spare wheel in the Mercedes Sprinter van?
Mercedes Sprinter (2018-2024 / Br910, MK 3, Br907) In this tutorial we can see how to release the spare wheel in the Mercedes Sprinter van, a very simple and quick operation to be carried out in case
How do you set the clock on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) The clock on the Mercedes Sprinter can be adjusted by turning on the instrument panel and inserting the appropriate key into the ignition. Once the p

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos