Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the AdBlue top-up warning on the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: AdBlue warning light

This brief guide will show us the main information on how to reset the AdBlue top-up warning on the Mercedes Vito, in simple steps. First, we get on board the vehicle and turn on the instrument panel; then we check the AdBlue level on the instrument panel display, carrying out the required top-up. At this point, we top up with the appropriate canister or directly at the distributor; now we connect our diagnostic software to reset the AdBlue warning from the instrument panel, finally turning off the panel and starting the engine!

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Mercedes Vito?
How do you reset the AdBlue warning light on the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) The AdBlue warning light on the Mercedes Vito's instrument panel can be reset by first performing a refill: to do this, you will need to open the fue…
How do you reset the AdBlue warning light on the Mercedes Vito?
How do you reset the AdBlue warning light on the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) In order to reset the AdBlue warning light on the Mercedes Vito, you need to top up the AdBlue fluid by adding the necessary amount into the system: …
Reset of the maintenance (service) warning for the Mercedes Vito.
Reset of the maintenance (service) warning for the Mercedes Vito.
Mercedes Vito (2003-2013 / W639, MK 2) Below we will see the instructions that will allow us to reset the regular maintenance (service) reminder of the Mercedes Vito. First, we get inside …

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos