Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : How do you top up the coolant on the Mercedes Vito?

Mercedes Vito - Video tutorial

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Antifreeze liquid
Operation: How do you top up the coolant on the Mercedes Vito?

To perform the coolant refill on the Mercedes Vito, you need to open the hood so that you can access the components located inside the engine compartment. In the lower right part, near the left low beam headlight, you will find the reservoir containing the coolant. This reservoir can now be opened by unscrewing the corresponding cap, and the necessary amount of liquid can be inserted. After completing the refill, you can close the reservoir again with its corresponding cap.


Posted on 13 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos