Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Wheel replacement with alloy rim

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Wheel
Operation: Wheel replacement with alloy rim

Unhook the rim cover cup and loosen the fixing pins before lifting the car off the ground. Position the crik in correspondence with the relative rib of the frame and lift the car until the tire is about 5 cm away from the ground, complete the removal of the fixing pins and remove the wheel from the hub. Position the new wheel with the light alloy rim, aligning the passage holes of the pins with the threaded holes of the hub; apply the fixing pins by first screwing them manually and tighten them. Lower the car and check the tightness of the pins again.


Posted on 29 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - How do you reset the tire pressure on a Mercedes C-Class w204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos