|
Do it yourself
| |||
| ||||
Remove a Front Shock Absorber from a Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Remove a front shock absorber from a Mercedes C-Class. Follow these steps carefully: Loosen the wheel nuts, lift the car on a column lift, and remove the wheel. Spray the shock absorber with penetrating oil, then use a screwdriver to remove the screws from the plastic inner fender. Now, remove the mounting bolts for the oil lines and the vertical arm bolt. If the bolt does not come out, use a hammer and penetrating oil to help. Lower the lift and remove the bolts on the engine bay side, then pull the shock absorber out of its housing, separating the spring from it. Insert the new spring, and after installing it, place the shock absorber back into its housing. First, tighten all the bolts at the top in the engine bay, then secure the bottom. Bolt the vertical arm to the wheel hub and the shock absorber. Tighten all the bolts with their respective parts.
Updated on 28 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
.. start, open the front door of your Mercedes C-Class. First, unlock the door to lift the lock pin from its housing. Then, unscrew and remove the pin.. …
Mercedes Classe C
(2007-2013 /
W204)
.. How do you remove the door panel of a Mercedes C-Class? Let’s see how to proceed in this video. Before starting the disassembly, disconnect the battery t.. …
Mercedes Classe C
(1993-2000 /
W202)
.. and repair the front door lock of a Mercedes C-Class W202. First, open the front door and use a hex key to remove the rear screw of the lock, which.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |