Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the door panel of a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door panel
Operation: Removing the door panel of a Mercedes C-Class

How do we go to remove the door panel of a Mercedes C-Class? Let's see together in this video how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Let's start the disassembly: with a lever remove the plastic placed in the corner of the window, then remove the gasket around the window. With a screwdriver we go to unscrew the tightening screws placed in the plastic handle. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We carry out the necessary maintenance in the door.


Posted on 13 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos