Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on a Mercedes CLK

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

Below we will see the instructions on how to reset the regular maintenance reminder for the engine oil change of the Mercedes CLK. First of all, we get on board the car and start the instrument panel; then we press the button on the left of the panel three times, bringing us to the battery voltage, as shown in the video.

At this point, we go to the service menu and confirm the reset of the maintenance key, holding down the reset button for three seconds; we turn off the instrument panel and start the engine, completing the reset operation!


Posted on 12 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes CLK
How to Reset the Service Light on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Learn how to reset the service light on a Mercedes CLK: turn on the ignition and use the buttons on the dashboard to navigate until you see the total…
How to Reset the Service Light on a Mercedes CLK
How to Reset the Service Light on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Today, we will show you the steps to reset the service light related to the car service on a Mercedes CLK model W 209. To reset the light, turn on th…
How to Reset the "Service" Light on a Mercedes CLK?
How to Reset the "Service" Light on a Mercedes CLK?
Mercedes Clk (1997-2003 / A208, C208, W208) Hello and welcome back to our page! Today, you will learn how to reset the "Service" light on your Mercedes CLK. Before performing this procedure, it…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos