Do it yourself
Frequently asked questions about cars and motorcycles

How to open the hood of the Mercedes S-Class

Model: Mercedes Classe S W221, MK 5 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will see the instructions that will allow us to open the engine hood of the Mercedes S-Class, in simple and quick steps. First, we open the front door on the driver's side and start pulling the red opening lever that we find at the bottom; then we move to the front of the car to release the engine hood latch, then lift it up, as shown in the video.

The engine hood is held in this case by hydraulic pistons (sometimes there may be a rod); we gently lower the engine hood to close it, applying light pressure.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

Mercedes Classe S (2005-2013 / W221, MK 5) .. this tutorial, opening the hood on a Mercedes S-Class is a very simple operation. First, open the driver's side door, then locate the red release lever.. …
Mercedes Classe S (2013-2020 / MK 6, W222) .. video, see how to open the hood of a Mercedes S-Class that has been in an accident, resulting in a broken cable that prevents the hood from opening... …
Mercedes Classe S (2013-2020 / MK 6, W222) .. angle of the front headlights on a Mercedes S-Class, open the hood to access the bolts located on the top of the headlight assemblies. Here, you will.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Replacing the Glow Plugs on the Fiat Ducato 2.3 Multijet

Today, we will go through the main instructions to remove and replace the glow plugs on the Fiat Ducato 2.3 Multijet. First, open the bonnet of the vehicle and begin by removing the front bumper; to access the glow plugs, it will also be necessary to remove the cooling radiator and the intercooler by unscrewing the bracket bolts and disconnecting the various pipes. Now disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, replacing them with new original ones.

Watch the video!


by ScegliAuto

More videos