Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting maintenance on a Mercedes C-Class W202

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Service warning light

See other generations:
Video tutorial

In today's tutorial, we will see how to reset the maintenance interval on a Mercedes C-Class w202. First, turn on the instrument panel of the car without starting the engine, then press the "0" button on the left of the speedometer twice, and then turn off the instrument panel.

After that, press and hold the "0" button again and turn on the instrument panel.

Now, you will see the maintenance interval flashing on the information display. Wait for about ten seconds with the button pressed until the maintenance interval is reset as shown in the video, and finally restart the vehicle.


Posted on 16 September 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Mercedes-Benz C-Class W202?
How to Reset the Service Light on the Mercedes-Benz C-Class W202?
Mercedes Classe C (2007-2013 / W204) .. reset the service light on the Mercedes-Benz C-Class W202, do the following: 1) Turn the key to position 2; 2) Press the "0" button on the left side.. …
How to Set the Time on the Mercedes C-Class W202
How to Set the Time on the Mercedes C-Class W202
Mercedes Classe C (1993-2000 / W202) .. on the instrument cluster of your Mercedes C-Class W202, just follow these simple steps. First, go inside the cabin and reach the driver's seat. Next,.. …
Disassembly and Repair of Mercedes C-Class W202 Door Lock
Disassembly and Repair of Mercedes C-Class W202 Door Lock
Mercedes Classe C (1993-2000 / W202) .. and repair the front door lock of a Mercedes C-Class W202. First, open the front door and use a hex key to remove the rear screw of the lock, which.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos