Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the fuel filter of the Mercedes C-Class 2.2 CDI

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Diesel fuel filter

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the diesel filter of the Mercedes C Class 2.2 CDI. First, we open the hood of the car and start removing the upper plastic cover of the engine; then we locate the diesel filter, disconnecting the filter hoses and the electrical connector of the sensor, unscrewing the bracket screw to remove the cartridge.

At this point, we install the new diesel filter, replacing the hoses if necessary, and then start the engine!


Posted on 19 October 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) Today, we will go through the instructions to disassemble and replace the alternator on the Mercedes C-Class 220 CDI. First, open the hood of the veh…
Mercedes Classe C (2007-2013 / W204) In this video tutorial, you will learn the main steps to remove the injectors from a Mercedes C-Class 200 CDI. First, open the hood and disconnect th…
Mercedes Classe C (2000-2007 / W203) Below are the instructions to remove and replace the starter motor on a Mercedes C-Class 220 CDI. First, lift the vehicle and locate the starter moto…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos