|
Do it yourself
| |||
| ||||
How do you reset the Service light on a Mercedes Classe C?
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
When turning on the instrument cluster of the Mercedes Classe C, it will be possible to reset the Service light that appears, allowing access to the items in the menu: you will need to navigate using the buttons on the side spokes of the steering wheel, so that the item with the wrench icon is highlighted. Once this appears on the display, you must press and hold the button located on the left side of the cluster: this way, you can proceed to correctly reset the light. By turning the instrument cluster off and on again, you can verify that the reset has been completed correctly.
Posted on 26 December 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
To reset the Service light on the Mercedes-Benz C-Class, turn the key to the ON position to activate the instrument cluster. Then, press and hold the…
Mercedes Classe C
(1993-2000 /
W202)
To reset the Service light on the Mercedes C-Class, press and hold the ZERO button located on the left side of the instrument cluster while the clust…
Mercedes Classe C
(1993-2000 /
W202)
To reset the Service light on the Mercedes-Benz C-Class, insert the key into the ignition switch and turn it to the on position: once the instrument …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |