Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Some Interior Panels from a Door

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

In this video, you will see how to disassemble some of the accessory panels located inside the door of a Mercedes W221. Start with the audio diffuser cover: use a plastic trim tool to gently pry the cover to the left while simultaneously pulling it out with your other hand.

After removing the protective plastic, disconnect the power cable of the diffuser.

Next, remove the plastic cover that conceals the electrical connections in the door, and then proceed to disconnect those connections. In this area, remember to unscrew one of the screws that secure the main door panel.

In the recess of the left armrest, there is another panel; you can detach it with a slight twist using a plastic spatula in the lower gap of the panel. This will reveal two more main fastening screws: proceed to unscrew them.

Finally, remove the door lock cover by simply unscrewing its fastening screw.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing the Exterior Door Handle on a Mercedes S-Class
Replacing the Exterior Door Handle on a Mercedes S-Class
Mercedes Classe E (2009-2016 / W212) Let's see how to remove the exterior door handle from a Mercedes E-Class. Open the door and remove the cover cap from the inspection hole. Once the i…
Removing the Rear Door Panel
Removing the Rear Door Panel
Mercedes Classe E (1995-2002 / W210) The video demonstrates the steps needed to remove the rear door panel of your Mercedes E-Class. First, you need to remove a few screws, with their po…
How to Remove the Outer Handle of the Mercedes E-Class?
How to Remove the Outer Handle of the Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) To remove the outer handle of the Mercedes E-Class, open the door to detach the rubber cover on the side of the door. Underneath, there will be a scr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos