Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes-Benz C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

This short and simple guide will show you the procedure to reset the service light for the regular maintenance oil change on a Mercedes-Benz C-Class. First, get inside the cabin and turn on the ignition; then navigate to the vehicle settings by pressing the two buttons on the steering wheel, followed by selecting 'Assyst Plus' and then 'Full Service', as shown in the video.

At this point, enter and record the new maintenance sticker, thus resetting the regular maintenance warning from the instrument cluster!


Posted on 24 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. regular maintenance oil change on a Mercedes C-Class. First, get in the vehicle and turn on the ignition; then go to the onboard computer menu and select.. …
Mercedes Classe C (2007-2013 / W204) .. to turn off the service light on your Mercedes C-Class? Let's see how to reset it. Turn on the ignition with the key fob, press the buttons located near.. …
Mercedes Classe C (2014-2021 / W205) .. see how to reset the service on a Mercedes C-Class by following a few simple steps: insert the key and turn it to position one to power on the instrument.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos