Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Central Locking Switch on a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

How to remove the central locking switch located in the door panel of a Mercedes B-Class? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the front engine compartment.

Using a lever or screwdriver, pry between the switch and the door panel (as shown in the video). Finally, remove the central locking switch from the panel (disconnect the electrical connector), fit the new switch into the door panel (connect the electrical connector).


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Guide to Programming the Key for the Mercedes-Benz B-Class
Guide to Programming the Key for the Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the remote key for the Mercedes-Benz B-Class, as well as the A-Class. To perform the programming, you need the specific software that allows.. …
How to disassemble the car radio of the Mercedes B-Class
How to disassemble the car radio of the Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. The disassembly of the radio of the Mercedes B-Class is a simple and quick operation to be carried out independently. To perform this simple operation,.. …
How to Disable the Automatic Locking of the Doors on a Mercedes B-Class?
How to Disable the Automatic Locking of the Doors on a Mercedes B-Class?
Mercedes Classe B (2011-2019 / MK 2, W246) .. automatic locking of the doors on a Mercedes B-Class, follow these steps. Start by turning on the car and ensuring that all doors are closed. Then,.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos