Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes-Benz C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

You can completely eliminate the Service light from the instrument cluster of the Mercedes-Benz C-Class by navigating through the menu displayed on the instrument cluster, pressing the buttons located on the left side of the steering wheel. Once you locate the option showing the miles remaining until the next maintenance, press and hold the OK button and the button for answering calls.

This will give you access to the menu from which you can reset the light by following the instructions: when the reset is complete, you can turn off the ignition by removing the key from the lock.


Posted on 7 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the "On" position to activate the instrument cluster. Then, press and hold the.. …
Mercedes Classe C (2007-2013 / W204) .. To reset the Service light on a Mercedes C-Class, turn the key to the ON position to activate the instrument cluster. Then, press and hold the OK.. …
Mercedes Classe C (2014-2021 / W205) .. To reset the Service A7 light on a Mercedes-Benz C-Class, turn on the ignition by inserting the key into the ignition switch. Then, press and hold.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos