Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror from an External Mirror on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

See other generations:
Video tutorial

Let's see how to remove the mirror from an external mirror on a Mercedes E-Class. Use a lever (with a plastic or rubber coating) to pry between the perimeter of the mirror frame and the mirror glass.

Pry until the glass detaches from the mirror (disconnect the power cable). Remove the mirror cover, and replace the damaged part with the new one. Be careful to engage the plastic snap clips into the cover supports during the installation of the new mirror.

Remove the turn signal from the housing if you need to replace it.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Rearview Mirror on the Mercedes E-Class
How to Replace the Outside Rearview Mirror on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the outside rearview mirror on the Mercedes E-Class in simple and quick steps. First, move to the outside near the mirror and start detaching the mirror.. …
Replacing the Exterior Rearview Mirror on the Mercedes E-Class
Replacing the Exterior Rearview Mirror on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. the exterior rearview mirror on the Mercedes E-Class by following the instructions below. First, open the front door and start by removing the plastic.. …
How to Remove the Mirror of a Mercedes E-Class
How to Remove the Mirror of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. you remove the exterior mirror of the Mercedes E-Class? Let's see how to take off the mirror. Remove the inner trim piece of the mirror using a plastic.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos