Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the door panel with attached button of a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Push button
Operation: How to remove the door panel with attached button of a Mercedes C-Class

How to remove the door panel with attached button of a Mercedes C-Class? Let's see how to proceed together in this video. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a lever, remove the plastic placed in the corner of the window, then, with a screwdriver, we go to unscrew the tightening screws placed in the plastic handle. Once all the screws have been removed, remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We remove the keypad on the front of the panel.


Posted on 20 November 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 1993-2000 - How do you change the window regulator button in a 2000 Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos