Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : Mercedes B-Class W245 rear brake disc replacement

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Brake discs
Operation: Mercedes B-Class W245 rear brake disc replacement

In this video we will see how to replace the rear brake discs of the Mercedes B-Class W245. First of all we lift our car and we go to remove the rear wheel by unscrewing the bolts: then with two wrenches (one 13 and one 16) we go to remove the screws located behind the brake caliper to remove it. Help yourself with a screwdriver to remove the pads: use a torx t27 to remove the screws of the disc (five screws): at this point we extract the disc. Clean the seat first and then reassemble the new disc with the brake caliper and pads.


Posted on 7 December 2023 by ScegliAuto



How to replace the rear wheel bearing of a Mercedes Class B version W245.
Mercedes Classe B (2005-2011 / MK 1, W245) In this video, we will see how to replace a bearing on the rear wheel of a Mercedes Classe B W245 version. First, we loosen the wheel bolts, then we
Mercedes B-Class W245 V-belt replacement
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace, in simple steps, the V-belt of a Mercedes B-Class W245, but also on other models of the manufacturer such as the A-Class. First we lift..
How to replace the headlight bulb Mercedes B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) .. the left front headlight (driver's side) of the Mercedes B-Class W245 is really very simple to do; once the front hood has been opened and secured, the..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos