Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disconnecting/Replacing Battery on Mercedes GLK 350

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

Video tutorial

The video shows the procedure for replacing the battery on a Mercedes GLK 350. Open the bonnet; the battery is located under a plastic cover in the upper right corner of the engine bay, secured by three clips at the back. To unlock them, push the two outer clips inward and pull the central one upwards.

The box can be easily lifted out. Disconnect the negative terminal of the battery using a 10 mm socket, then repeat the procedure with the positive terminal. If you intend to replace the battery, use a 13 mm socket to loosen the two bolts securing the battery on the right side.

Remove the battery and follow the reverse procedure to install the new one, ensuring to connect the positive terminal last.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mercedes GLK
How to Replace the Battery in a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) In this brief and simple guide, remove and replace the battery in your Mercedes GLK. First, open the bonnet and start by removing the air duct locate…
How to reset the service light of the 2011 Mercedes GLK 350
How to reset the service light of the 2011 Mercedes GLK 350
Mercedes Glk (2008-2015 / MK 1) Resetting the service light of the 2011 Mercedes GLK 350 is a very simple operation to perform as you just need to use the vehicle's onboard menu. Fi…
Replacing the Key Fob Battery for the Mercedes GLK
Replacing the Key Fob Battery for the Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) In this short and simple guide, you will see the main steps to disassemble and replace the battery in the key fob for the Mercedes GLK, following the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos