Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Center Console Mercedes A-Class W168

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Dashboard

See other generations:
Video tutorial

In this video tutorial, you will see how to disassemble the main parts of the dashboard of a Mercedes A-Class W168. Get inside the vehicle and grab some plastic trim tools: then remove the plastic trim around the cigarette lighter and unscrew the screws found underneath; then remove the shift boot along with the knob by pulling upward with force.

At this point, remove the screw from the center tunnel and take off the plastic, disconnecting the power connector of the window regulator; then disassemble the radio and remove the side plastics, as shown in the video!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Disassembly of the Central Controls Mercedes A-Class
Disassembly of the Central Controls Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Today you will see how to disassemble the central instrumentation of a Mercedes A-Class: let's discover the main steps! First, get inside the car and…
Removing Armrest from Mercedes A-Class W168
Removing Armrest from Mercedes A-Class W168
Mercedes Classe A (1997-2004 / W168) .. the armrest from a first-generation Mercedes A-Class W168 in simple steps. First, get inside the vehicle, at the rear, and remove the plastics from.. …
Engine Removal Instructions for Mercedes A-Class W168
Engine Removal Instructions for Mercedes A-Class W168
Mercedes Classe A (1997-2004 / W168) .. engine block from a first-generation Mercedes A-Class W168. First, open the hood and disconnect the battery by removing the terminals. Next, disconnect.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos