Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

Start by removing the battery and the entire air filter assembly. Next, remove the upper and lower engine covers by unscrewing the bolts that secure them.

At this point, you can remove the starter motor. Once the starter motor is removed, proceed to remove the left front wheel, then take out the wheel well liner.

This will give you the necessary space to access the cover that protects the belts, which you will remove to reach the timing belt. To remove the belt, simply loosen the pulley and then take it off, completing the disassembly.

To install the new belt and reassemble everything, follow these instructions in reverse, successfully completing the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2012-2018 / W176) .. and replace the timing belt on the Mercedes A-Class with a Renault engine. First, open the hood of your car and begin to remove the timing belt cover;.. …
Mercedes Classe A (2018-2026 / W177) .. and replace the timing belt on a Mercedes A-Class. First, lift the vehicle and start by removing the front right wheel; then remove the crankshaft.. …
Mercedes Classe A (2018-2026 / W177) .. and replacing the timing belt on the Mercedes A-Class. First, open the hood of the vehicle and start by removing the engine mount. Then, raise the vehicle.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the cigarette lighter fuse on the Ford Fiesta?

The fuse for the cigarette lighter socket on the 2010 Ford Fiesta is located inside the fuse box within the vehicle. Specifically, the fuse is found in the driver’s side glove compartment. To check the fuse after confirming that the socket is not working, you need to remove the entire compartment. The relevant fuse is numbered 6 and rated at 20 watts. Once you have removed the damaged fuse, insert a new one to restore proper function to the socket. If the problem persists, it indicates an issue with the control unit, in which case you will need to visit a garage for a diagnostic check.

Watch the video!


by ScegliAuto

More videos