Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Compartment on a Mercedes C-Class W204

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Glove compartment

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the glove compartment on a Mercedes C-Class W204 by following these simple instructions. First, get inside the vehicle and start by removing the lower plastic panel found at the bottom by unscrewing all the screws with a T20 Torx screwdriver; then disconnect the electrical connector for the bulb and the temperature sensor.

At this point, remove the side cover of the glove compartment and unscrew the securing Torx screw; then remove the side cable and unscrew all the fastening screws inside the glove compartment. Finally, remove it by following the tutorial to the end!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan on the Mercedes C-Class W204
Removing the Cabin Fan on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. replacing the cabin fan on the Mercedes Benz C-Class W204 in simple steps. First, access the front passenger compartment and start by removing the lower.. …
Where to Find the Fuse Box on a Mercedes-Benz C-Class W204
Where to Find the Fuse Box on a Mercedes-Benz C-Class W204
Mercedes Classe C (2007-2013 / W204) .. contains all the fuses for your Mercedes-Benz C-Class W204. First, lift the hood of the car to gain access to the engine compartment. Then, locate the.. …
How to Remove the Rear Seats in a Mercedes C-Class W204?
How to Remove the Rear Seats in a Mercedes C-Class W204?
Mercedes Classe C (2007-2013 / W204) .. the rear seats is performed on a Mercedes C-Class W204, but it is very similar to the Mercedes C-Class W203, so the available video can be used as.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos