Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement on a Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Unscrew the screw that holds the air duct clamp in the engine bay (to your left), open the clip, and detach it. Then disconnect the connector shown in the video and remove the air filter box by manually detaching the two front attachments and sliding it off the rear ones.

Set the filter box aside.

Also, manually remove the underlying cover, and you will finally see the diesel filter. This is secured by two clips that you can open with a flat-head screwdriver.

Disconnect the small flexible hoses and remove it.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Mercedes Sprinter
Replacing the Diesel Filter on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) This brief guide outlines the steps to remove and replace the diesel filter on the Mercedes Sprinter in simple steps. First, open the bonnet of your …
How to Replace the Fuel Filter on a Mercedes Sprinter?
How to Replace the Fuel Filter on a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / MK 1, W901) To replace the fuel filter on a Mercedes Sprinter, open the bonnet to access the components inside the engine bay: on the side, you will locate the f…
Replacement of the diesel fuel filter of the Mercedes Sprinter
Replacement of the diesel fuel filter of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Today we will discover the instructions that will allow us to disassemble and replace the fuel filter of the Mercedes Sprinter, in simple steps. Firs…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos