Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gla
    4. : How to remove the armrest and the central tunnel on Mercedes GLA

Mercedes Gla - Video tutorial

Model: Mercedes Gla W156, MK 1 - Years 2013-2019
Part: Central tunnel
Operation: How to remove the armrest and the central tunnel on Mercedes GLA

In this video we will see the steps to disassemble the armrest, along with the glove box, and the central tunnel on a Mercedes GLA. First we get on board the car and we go to remove the air vents of the central tunnel, levering the sides and disconnecting the electrical connector; after which we unscrew the screws at the bottom, using a ratchet wrench. Then we leverage the central tunnel to remove the plastic, disconnecting the various electrical connectors including that of the puddle; then remove all the central tunnel, together with the armrest storage compartment.


Posted on 30 January 2024 by ScegliAuto



How do you remove the rear window of the Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) In order to replace the rear glass of the Mercedes GLA, you have to loosen the screws that secure the door panel in question. These screws are locate
Where is the OBD port located on the 2017 Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) If you own a 2017 Mercedes GLA and want to find out where the OBD port is located to connect any compatible diagnostic tool, then all you have to do
How do you replace the windshield wipers on the Mercedes Gla?
Mercedes Gla (2013-2019 / W156, MK 1) For the replacement of the windshield wipers, we can take a look at this video guide, complete with commentary, which shows the whole procedure, whic

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos