Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Mercedes E-Class W211 windshield wiper replacement

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Windscreen wipers
Operation: Mercedes E-Class W211 windshield wiper replacement

In this video guide we will see how to remove and replace, in simple steps, the front wipers of a Mercedes E-Class W211. First of all, let's get the wipers of the right type and go to raise the arm of the same; after which we are going to remove the old wiper, putting it in a horizontal position and exiting it from the guide, as shown in the video. At this point we assemble the new spare part by proceeding with the reverse disassembly procedure; we just have to carry out the same procedure with the other wiper and, if necessary, also with the rear one.


Posted on 3 February 2024 by ScegliAuto



How to replace the front wiper blades of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. the front windshield wiper blades of the Mercedes E-Class is a very simple operation to perform independently, thanks also to our short video..
How to replace the front wiper fuse on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. front wiper fuse, and how to replace it, on the Mercedes E-Class W212. First of all we open the bonnet of our car and we go to remove the cover of the..
Mercedes E-Class W211 headlight bulb replacement
Mercedes Classe E (2002-2009 / W211) .. and replace the original headlight bulb on a Mercedes E-Class W211, following these simple steps. First of all, we open the engine hood of the car..

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos