|
Do it yourself
| |||
| ||||
Battery Replacement on Mercedes C-Class W203
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
To access the battery, as shown in the video, you may need to remove the air filter. Once done, disconnect the two terminals by loosening them with a 10 mm wrench (always remember to disconnect the negative terminal first). Isolate both terminals with masking tape and remove the two 13 mm bolts that secure the battery to the lower bracket. At this point, you can extract the battery. Proceed in reverse for reassembly by placing the battery back in position, tightening the securing bolts, and reconnecting the two terminals. Check the proper functioning of the new battery.
Updated on 13 April 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
The steps to replace the key battery on a Mercedes C-Class model W203 are: -First step: press the button/lever at the end of the key to extract the e…
Mercedes Classe C
(2000-2007 /
W203)
.. the remote key battery on the Mercedes Benz C-Class W203, third generation. First, take your remote and remove the physical key from it; then, pry.. …
Mercedes Classe C
(2000-2007 /
W203)
.. transmission control module on the Mercedes C-Class W203, as well as on other models from the manufacturer (such as the A-Class W163). First, disconnect.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |