Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery on the Mercedes C-Class W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Key

See other generations:
Video tutorial

In this brief video, learn how to disassemble and replace the remote key battery on the Mercedes Benz C-Class W203, third generation. First, take your remote and remove the physical key from it; then, pry open the slot to remove the battery compartment, as shown in the video.

At this point, remove and replace the battery with a new one of the correct type and the same designation; simply insert it in the correct orientation and reassemble the battery holder back into the remote, following the video until the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mercedes W203
How to Replace the Key Battery on a Mercedes W203
Mercedes Classe C (2000-2007 / W203) The steps to replace the key battery on a Mercedes C-Class model W203 are: -First step: press the button/lever at the end of the key to extract the e…
Replacing the Transmission Control Module on the Mercedes C-Class W203
Replacing the Transmission Control Module on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. transmission control module on the Mercedes C-Class W203, as well as on other models from the manufacturer (such as the A-Class W163). First, disconnect.. …
Where is the OBD2 port located in the Mercedes C-Class W203?
Where is the OBD2 port located in the Mercedes C-Class W203?
Mercedes Classe C (2000-2007 / W203) .. port located inside the cabin of your Mercedes C-Class W203 in just a few seconds. First of all, you need to completely turn off the car so that you can.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos