Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes GLA 180

Model: Mercedes Gla W156, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Before you begin, open the front bonnet of your Mercedes GLA 180. Start by unclipping and removing the upper battery cover. Next, unclip and remove the cover over the positive terminal.

Then, unscrew and remove the screws securing the terminals to the battery, and disconnect them. At this point, unscrew and remove the lower bolt that secures the battery, then extract the battery from its housing, completing the disassembly.

To install the new battery, simply reverse these instructions, and you will have completed the replacement.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure on a Mercedes GLA 180
How to Reset the Tyre Pressure on a Mercedes GLA 180
Mercedes Gla (2020-2026 / MK 2, H247) To reset the tyre pressure warning light on a Mercedes GLA 180, the procedure is performed from the instrument cluster menu. A warning message regard…
How to Replace the Remote Battery on Mercedes GLA 250
How to Replace the Remote Battery on Mercedes GLA 250
Mercedes Gla (2020-2026 / MK 2, H247) If you intend to replace the battery inside the remote for your Mercedes GLA 250 yourself, simply follow the procedure described in this guide. First…
How to replace the remote battery of a Mercedes GLA 45 AMG?
How to replace the remote battery of a Mercedes GLA 45 AMG?
Mercedes Gla (2013-2019 / W156, MK 1) To replace the battery in the remote of the Mercedes GLA 45 AMG, remove the key from the top of the device: once removed, use a lever inside its hous…

    Frequently Asked Questions

    • Gla 2013-2019 - Where is the Mercedes auxiliary battery located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos