Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes CLA 250

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Battery

Is the battery in your car due for replacement? Let's see how to remove the battery on the CLA. Lift the front hood, locate the battery cover, and remove it. Unscrew the terminal clamp screws and disconnect them from the battery. Remove the damaged battery from the engine compartment and place a new one of the same voltage. Connect the terminal clamps to the battery and tighten the screws. Cover the battery with the plastic cover. Finally, start the engine and test its operation. Close the front hood after testing.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Mercedes CLA 250
How to disassemble the external rearview mirror of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) If one of the external rearview mirrors of your first-generation Mercedes CLA 250 is broken or you simply want to replace it with a new one, then all…
Where to Find the OBD Port on a Mercedes CLA 250
Where to Find the OBD Port on a Mercedes CLA 250
Mercedes CLA (2019-2025 / C118, X118) To gain access to the OBD port of your Mercedes CLA 250 and connect a diagnostic tool, you need to carefully read the following guide and apply it st…
Replacement of the thermostat of the Mercedes CLA 250
Replacement of the thermostat of the Mercedes CLA 250
Mercedes CLA (2013-2019 / C117, X117) In this guide we will see the main instructions that will allow us to disassemble and replace the thermostat of the Mercedes CLA 250 with a 2.0 petro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos