Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard on the Mercedes C-Class W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Dashboard

See other generations:
Video tutorial

This guide shows the procedure for removing the dashboard and its components on the Mercedes C-Class W203. First, disconnect the two battery terminals; get in the car and start by removing the steering wheel and airbag by unscrewing the screws found at the back.

Next, remove the center console by taking off the cover of the gear lever; unscrew the screws underneath and remove the center trim, taking off the side plastics and unscrewing all the screws, as shown in the video.

Then, remove the air vents and the radio, disconnecting all the wiring; finally, remove the entire dashboard!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Where is the OBD2 port located in the Mercedes C-Class W203?
Where is the OBD2 port located in the Mercedes C-Class W203?
Mercedes Classe C (2000-2007 / W203) .. port located inside the cabin of your Mercedes C-Class W203 in just a few seconds. First of all, you need to completely turn off the car so that you can.. …
Where to Find the OBD2 Port on the Mercedes C-Class W203
Where to Find the OBD2 Port on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. this guide for all of you who own a Mercedes C-Class W203, follow these steps to quickly locate the OBD2 port in your vehicle. First, open the driver's.. …
Where to Find the OBD Port on the Mercedes C-Class W203
Where to Find the OBD Port on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. the OBD port is located inside your Mercedes C-Class W203 (2000-2007), don't worry because with the instructions in this guide, you'll be able to find.. …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos