Do it yourself
Frequently asked questions about cars and motorcycles

Trunk Lock Replacement on Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Door lock

Lift the trunk lid and use a plastic trim tool to remove the side clips as shown in the first image of the video. Repeat the same operation using a small flathead screwdriver on the central supports. Remove the supports. Unscrew the six T25 Torx screws located at the top of the trunk lid and remove the cover around the lock. Remove the clips and the cover secured by them. Once the trunk panel is removed, disconnect the various cables and the lock by unscrewing the mounting bolts. Follow the reverse order for reassembly.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (1995-2002 / W210) .. door lock of the front door of the Mercedes E-Class. First, we open the front door and begin to disassemble and remove the door panel, removing the.. …
Mercedes Classe E (1995-2002 / W210) .. the exterior door handle on the Mercedes E-Class. First, open the vehicle's door and start unscrewing the side screws to remove the lock cylinder,.. …
Mercedes Classe E (2002-2009 / W211) .. to replace the rear door panel on a Mercedes E-Class, a very simple operation. First, go inside the cabin, then remove the lower cover, unscrew the.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos