Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes CLA 200?

Model: Mercedes CLA C117, X117 - Years 2013-2019
Part: Battery

Replacing the battery in a Mercedes CLA 200 is very simple. You only need a 10mm socket wrench and a 13mm socket wrench. Start by loosening the nut that secures the positive terminal, disconnect it, and perform the same operation on the negative terminal. Also disconnect the small front tube and set it aside. Now, remove the lower 13mm bolt and take off the bracket. At this point, you can pull out the battery, insert the new one, and tighten the bolt and nuts. Don't forget to reconnect the front tube, as it is important for venting the internal gases of the battery.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Mercedes CLA
How to Replace the Battery in a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) To replace the battery in a Mercedes CLA, open the hood to access the components inside the engine compartment. Here, in the upper right area, you wi…
How to Replace the Battery in a Mercedes CLA
How to Replace the Battery in a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) To replace the battery in a Mercedes CLA, lift the hood to access the engine compartment. The battery is located directly under the windshield, on th…
Replace the Battery in the Mercedes CLA
Replace the Battery in the Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Need to replace the battery in your CLA? Is the battery due for a change? Let's go through the removal of the old battery located in the engine compa…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos