Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Light bulb

To replace the headlight bulb on a Mercedes A-Class, open the hood to access the back of the corresponding headlight. Remove the circular plastic cover located in the engine compartment to access the bulb. Disconnect the bulb from its connector and replace it with a new part. Connect the new bulb to the connector and insert it into its housing. Finally, close the headlight with its cover and check that everything works correctly.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Mercedes A-Class W176
How to Replace the Headlight Bulb on a Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. If you own a Mercedes A-Class W176 and are wondering how to replace the front headlight bulb, just follow the steps outlined.. …
Replacing the Low Beam Bulb on a Mercedes A-Class
Replacing the Low Beam Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing the tray located above the headlight; then remove the.. …
How to Replace the Headlight Bulbs on a Mercedes A-Class
How to Replace the Headlight Bulbs on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) First, release the hood using the designated lever and lift it up. Turn the wheels to gain easier access to the inner fender. This way, you can remov…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos