Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Mercedes SL

Model: Mercedes Sl MK 7, R231 - Years 2011-2021
Part: Door trim panel

In this video, follow the instructions to remove the front door panel of the Mercedes SL in simple steps. First, open the front door and start by removing the plastic cover in the center area, prying it off from the sides. Then, use a Torx screwdriver to remove all the screws located underneath, as shown in the video. Next, unscrew the additional screws on the door panel and pry it off from the sides to detach and completely remove it. Finally, disconnect the handle cable and the electrical connector of the switch panel!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Mercedes SL?
How to Remove the Door Panel of the Mercedes SL?
Mercedes Sl (2001-2011 / R230) To remove the door panel of the Mercedes SL, loosen all the screws that secure it to its housing: start with the one located at the top left of the p…
How to Remove the Door Panel on a Mercedes SL R129?
How to Remove the Door Panel on a Mercedes SL R129?
Mercedes Sl (1989-2001 / MK 5, R129) This video explains how to remove the door panel on the second version of the Mercedes SL, identified by the code R129. Start by removing the metal t…
How to Remove the Door Panel of the Mercedes Benz SL500
How to Remove the Door Panel of the Mercedes Benz SL500
Mercedes Sl (2001-2011 / R230) This guide shows how to disassemble the door panel of the 2002 Mercedes Benz SL500. First, remove the four screws on the side of the door: three from…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos