Do it yourself
Frequently asked questions about cars and motorcycles

Oil and Filter Replacement for Automatic Gearbox

Model: Mercedes Slk MK 1, R170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Transmission fluid

See other generations:
Video tutorial

To change the oil in the automatic gearbox, first obtain the oil (5 litres), the gasket, and the filter as shown in the initial sequences. Next, raise the car while always adhering to safety regulations.

Unscrew the oil drain plug, keeping a container handy to collect the used oil. Then, remove the oil sump along with the filter. Clean the disassembled components, paying attention to the magnets inside the sump that attract any metal particles present in the fluid.

Refit the filter and the sump. Optionally measure the amount of oil extracted to avoid exceeding the maximum oil level required.

Pour in the oil and start the engine for a few minutes, checking for leaks under the car and moving the selector a few times. Now check the level, taking into account the engine temperature.

Car model: Mercedes Benz 230 SLK Year: 2002 Required tools: 5mm Allen key, T30 socket.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Mercedes Slk (2004-2011 / MK 2, R171) In this tutorial we can see how to reset the automatic transmission in the Mercedes SLK, an extremely simple and quick operation, to be carried out f…
Mercedes Slk (2004-2011 / MK 2, R171) In this short video tutorial, learn how to remove the gear selector knob on various Mercedes-Benz models, including the E, S, C, CL, ML, SLK, and CLK…
Mercedes Slk (1997-2004 / MK 1, R170) To check the automatic transmission oil level, you need a specific dipstick as there is no level check stick, only a cap. Once you open the front bon…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos