Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Seat of the Mercedes SL

Model: Mercedes Sl MK 5, R129 - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Seat

See other generations:
Video tutorial

In this video tutorial, we will see the main instructions that will allow us to remove the front seat of the Mercedes SL, following the steps outlined below. First, open the front door and begin unscrewing the fastening screws located under the seat, using a Torx screwdriver; then remove the lower part, followed by disassembling the entire backrest, as shown in the video.

At this point, if necessary, remove the handle and the seat adjustment system; then reassemble everything by applying the reverse procedure!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Seat Folding Lever Cable Adjustment
Seat Folding Lever Cable Adjustment
Mercedes Sl (1989-2001 / MK 5, R129) The seat in the car model shown in the video is equipped with various electric adjustments but has a manual lever that allows you to fold the backres…
Disassembling Electric Seat Adjustment Controls
Disassembling Electric Seat Adjustment Controls
Mercedes Sl (1989-2001 / MK 5, R129) The controls for the electric seat adjustment are located on the door panel, just below the internal opening handle: to disassemble them, you first n…
Removing Plastic Trim Moldings
Removing Plastic Trim Moldings
Mercedes Sl (1989-2001 / MK 5, R129) The plastic trim moldings along the lower edge of the doors are secured with retaining clips but have tabs at the ends for proper anchoring: you must…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos