Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Mercedes A-Class?

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear door panel on the Mercedes A-Class W168. Start by removing the window switch with a flathead screwdriver. Then, use a plastic trim tool to pry off the covers of the armrest handle to access the two internal screws.

At this point, pry along the entire perimeter of the panel using the trim tool. Once fully detached, pull it towards you and disconnect the two lock actuator cables.

To install the replacement, simply follow the reverse procedure.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Lock of the Mercedes A-Class
How to Remove the Rear Door Lock of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. replacing the rear door lock of the Mercedes A-Class. First, open the rear door and start removing the door panel by unscrewing all the fastening screws;.. …
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
How to Remove the Rear Door Panel of the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. the rear door panel of the Mercedes Benz A-Class W176. The first step is to remove the chrome trim panel of the armrest using a trim removal tool... …
How to Remove the Rear Door Panel on the Mercedes A-Class W176
How to Remove the Rear Door Panel on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. In this short and simple video, see how to remove the rear door panel on the Mercedes A-Class W176, third generation, by following the instructions.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos