Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wiper Fuse on a Mercedes E-Class W211?

Model: Mercedes Classe E W211 - Years 2002-2009

This guide will show you the location of the front wiper fuse and how to replace it on a Mercedes E-Class W212. First, open the hood of your car and remove the cover of the fuse box, which is located on the right side of the engine compartment; then locate the fuse, which is the first one at the top left, as shown in the video. At this point, remove the fuse with needle-nose pliers and replace it with a new one of the same amperage; all that's left is to check the operation of the wipers!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Windshield Wiper Replacement for Mercedes E-Class W211
Windshield Wiper Replacement for Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the front windshield wipers on a Mercedes E-Class W211 in simple steps. First, obtain the correct type of wipers and lift the wiper arm. Next, remove.. …
Things to Know About the Mercedes E-Class W211
Things to Know About the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. see some things to know about the Mercedes E-Class W211 that not everyone may be aware of. If you look at your car key, you will notice that there.. …
Where is the OBD2 port located on the Mercedes E-Class W211?
Where is the OBD2 port located on the Mercedes E-Class W211?
Mercedes Classe E (2002-2009 / W211) .. locate the OBD2 port inside your Mercedes E-Class W211, just read the following guide carefully and follow the steps described. Once inside the vehicle,.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos