Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Diesel Filter

Model: Mercedes Sprinter MK 1, W901 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Diesel fuel filter

See other generations:
This video is currently unavailable

This video shows how to remove and replace the diesel filter on your car. First, locate the housing of the filter and proceed to remove the inlet and outlet pipes. Once the various clips are loosened, you can slide off and remove the inlet and outlet pipes of the filter; then, remove the filter from its housing by unscrewing some screws that hold it in place.

Once the old filter is removed, install a new one (suitable for your vehicle) by reversing all the steps. Finally, after completing the installation, check for proper operation.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Mercedes Sprinter
Replacing the Diesel Filter on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) This brief guide outlines the steps to remove and replace the diesel filter on the Mercedes Sprinter in simple steps. First, open the bonnet of your …
How to Replace the Fuel Filter on a Mercedes Sprinter?
How to Replace the Fuel Filter on a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / MK 1, W901) To replace the fuel filter on a Mercedes Sprinter, open the bonnet to access the components inside the engine bay: on the side, you will locate the f…
Replacement of Diesel Fuel Filter
Replacement of Diesel Fuel Filter
Mercedes Sprinter (1995-2006 / MK 1, W901) To replace this filter, obtain the new complete replacement component. Replacing the fuel filter is a straightforward task that should be done regula…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos