Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Replacement of the car radio on Mercedes S-Class

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Car stereo
Operation: Replacement of the car radio on Mercedes S-Class

Remove the lower part of the central dashboard by unscrewing the two side screws, as shown in the video. Once this is done, you can already extract the mask (or frame) of the radio itself from its seat by pulling it by hand from the lower part (work slowly so as not to damage the connections). At this point you will have free access to the screws that secure the radio in place. Unscrew them and extract the same. As you do this, remember to disconnect the rear cables (antenna and power connectors). Already done! To mount a new car stereo equivalent to the original, simply proceed in reverse order.


Posted on 20 May 2024 by ScegliAuto



Where are the fuses located in the Mercedes S-Class?
Mercedes Classe S (2005-2013 / MK 5, W221) .. Each fuse of the Mercedes S-Class is contained within one of the fuse boxes installed on the vehicle: in this type of vehicle, it..
What is the fuse diagram for the Mercedes S-Class?
Mercedes Classe S (1999-2005 / MK 4, W220) .. In case one or more devices in our Mercedes S-Class suddenly stop working, the first thing we can do is check the status of their respective fuses,..
How to replace the window console in the Mercedes S-Class?
Mercedes Classe S (2013-2020 / W222, MK 6) .. the main window console in the Mercedes S-Class, an extremely simple and fast operation. To do this, it is recommended to use a plastic spatula..

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos