Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Mercedes-Benz B-Class

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Clock

See other generations:
Video tutorial

To change the time on your Mercedes-Benz B-Class, start by pressing the button located on the left side of the steering wheel until the message "settings - to reset press reset button for 3 sec." appears. Press for 3 seconds, then adjust the time using the +/– buttons on the far right of the steering wheel.

If the time is correct, confirm by pressing the settings button you pressed earlier. You can follow the same procedure for the date, which is displayed alongside the time.

This situation occurs when the battery is disconnected for any reason, even just to change a fuse.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Set the Date and Time on a Mercedes-Benz B-Class
How to Set the Date and Time on a Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. allow you to set the date and time on a Mercedes-Benz B-Class. First, get into the vehicle and start the instrument panel; then go to the vehicle settings.. …
How to Set the Date and Time on a Mercedes-Benz B-Class
How to Set the Date and Time on a Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. to set the date and time on a Mercedes-Benz B-Class. First, get in the vehicle and turn on the instrument cluster. Use the central control to.. …
How to Set the Time on a Mercedes B-Class
How to Set the Time on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. sit in the driver's seat of your Mercedes B-Class. Begin by activating the instrument panel by turning the ignition key in the lock, without starting.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos