Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
Video tutorial

In this video, you will see how to open the hood of a Mercedes A-Class. Enter the cabin and sit in the driver's seat.

In the pedal area, above, you will see a red lever. Pull it all the way, as shown at minute 0:10. At this point, go to the front of the hood, which will be slightly raised; locate the release latch, found in the center near the car emblem, and move it to the side.

This will allow you to fully open the hood. Remove the prop rod from its holder, lift it, and secure it in the designated hook, and the operation will be complete.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Open the Hood of the Mercedes A-Class
How to Open the Hood of the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. learn how to open the hood of the Mercedes A-Class. To open the hood, pull the release lever located at the front near the driver’s pedals. The h.. …
How to open and close the hood of the Mercedes A-Class
How to open and close the hood of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and closing the front hood of a Mercedes A-Class vehicle, model W169, is a very simple and quick operation that you can do on your own, thanks to.. …
How to open the engine hood of the Mercedes A-Class.
How to open the engine hood of the Mercedes A-Class.
Mercedes Classe A (2018-2026 / W177) .. show us how to open the hood of the Mercedes A-Class, as well as the CLA. First, let's get inside the vehicle and start by pulling the red lever located.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos