Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLA
    4. : Where is the fuse box of the Mercedes CLA

Mercedes CLA - Video tutorial

Model: Mercedes CLA X117, C117 - Years 2013-2019
Part: Fuse box
Operation: Where is the fuse box of the Mercedes CLA

If you cannot find the box containing all the various fuses of your Mercedes CLA Mk1 (2013-1019), just follow the instructions in the following mini guide dedicated to you. First, switch off your Mercedes CLA and park it safely. Then go to the passenger side and open the glove compartment. At this point, using the side hooks present, you must disassemble the entire compartment in order to have access to the rear area. Finally, remove the cover of the fuse box and you will finally have access to them. At the end, refit both the lid and the glove compartment.


Posted on 11 August 2022 by ScegliAuto



What is the fuse diagram on the Mercedes CLA?
Mercedes CLA (2013-2019 / X117, C117) In the event that a device on our Mercedes CLA suddenly stops working, we can first of all check the state of its fuses, the diagrams of which are sh
Where are the fuses located in the Mercedes CLA?
Mercedes CLA (2013-2019 / X117, C117) Inside the Mercedes CLA, all the fuses are contained in the appropriate fuse box that is installed on the vehicle: the latter is located inside the c
How to replace the auxiliary battery on Mercedes CLA
Mercedes CLA (2013-2019 / X117, C117) In this video we will see the steps to disassemble and replace the auxiliary battery on a Mercedes Benz CLA. First of all we go to identify the posit

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos