Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Dynamic Turn Signal Lights in the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Accessory kit

See other generations:
Video tutorial

After obtaining the dynamic turn signal lights for your Mercedes E-Class, proceed to remove the mirror cap, which is completely snap-fit. You can assist in this operation using the lever that is almost always provided with the light kit or another similar object, remembering to disconnect the electrical connector as well.

Now remove the two Torx screws from the inside of the cap and pry on the tab shown in the video, then install the new dynamic turn signal light inside the mirror cap. Connect the wires correctly and then reattach the cap.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How do you replace the light switch of the Mercedes E-Class?
How do you replace the light switch of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. to replace the light switch of the Mercedes E-Class, you need to open the driver's door so that you can detach the side panel of the dashboard located.. …
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside the car and use a thin tool to pry off the various plastic.. …
How to Replace the Parking Light Bulbs in a Mercedes E-Class?
How to Replace the Parking Light Bulbs in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. replace the parking light bulbs in a Mercedes E-Class, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for.. …

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos