|
Do it yourself
| |||
| ||||
How to Replace the Cabin Filter in a Mercedes C-Class?
Model: Mercedes Classe C
W205
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
The Mercedes C-Class has two cabin filters. In this tutorial, you will see how to replace both. The first filter is located inside the engine compartment, under the plastic panel on the passenger side, which you will remove by unlocking the clips. Once done, disengage the box containing the filter, replace it, and reassemble everything. For the filter located behind the glove compartment, remove the screw from the lower panel, disconnect the bulb connector, and move the carpet enough to access the filter door. This operation can be challenging as the available space is very limited.
Updated on 10 June 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. Replacing the air filter on a Mercedes C-Class? Here’s how to do it. The cabin air filter is located at the bottom right of the glove compartment. G.. …
Mercedes Classe C
(1993-2000 /
W202)
.. replace the cabin air filter on the Mercedes C-Class. First, get in the vehicle on the passenger side and start by removing the rectangular plastic.. …
Mercedes Classe C
(1993-2000 /
W202)
.. In this tutorial, you will see how to replace the cabin filter in a Mercedes C-Class, a very simple and quick operation. First, go inside.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |